PP2 Thin-film, Third generation and Hybrid Devices

Program Package 2 (PP2) encompasses research into a range of next generation cell technologies with the overall goals of demonstrating efficiency above 16% for cells of greater than 1 cm2 area and of demonstrating the feasibility of significantly reduced costs. The current program is divided into tasks to address the key materials groups: organic photovoltaics (OPV), organic-inorganic hybrid cells, “Earth-abundant” inorganic thin-film materials and the hot topic of organic-inorganic perovskites.

results per page
Overview: Concepts envisaged or developed originally for conventional semiconductor photovoltaics can be applied to perovskite, organic photovoltaic (OPV) and dye sensitised solar cell (DSC) devices to boost
Chief Investigators: Fiona Scholes
Overview: The overall aim of this sub-package is to address challenges associated with scale up of printed photovoltaic.
Chief Investigators: Dr David Jones, Dr Wallace Wong
Overview: Commercialisation of emerging technologies requires performance profiles sufficiently high to allow confidence that translation to large scale modules will give commercial performance.
Chief Investigators: David Jones
Overview: Reseach in this area is focused on development of high performance p- and n-type organic semiconductors, interface modifiers, and luminescent solar concentrator materials for organic solar cells.
Overview: A key aspect of the current program is to ensure OPV device performance is measured against the common standard over a 1 cm2 area, rather than the typical 0.1 cm2 normally used for OPV.
Chief Investigators: Kenneth Ghiggino
Overview: The key aim of this package is to better understand the fundamental process occurring in solar cells so that the device architectures can be improved, and the fundamental process occurring in devic
Chief Investigators: Udo Bach
Overview: Organic Hole Transport Materials (HTMs) are commonly used in hybrid organic I inorganic (perovskite) solar cells to promote higher conversion efficiencies.
Chief Investigators: Udo Bach
Overview: We aim to:
Chief Investigators: Udo Bach
Overview: The high performance of perovskite solar cells makes this technology highly attractive for commercialisation as well as the possibility to manufacture perovskite solar cells by low-cost printing te
Chief Investigators: Xiaojing Hao
Overview: All successfully commercialised non-concentrating photovoltaic technologies to date are based on silicon or the chalcogenide (semiconductors containing Group VI elements, specifically Te, Se and S)